Prof. Dr. Beat Neuenschwander

Steckbrief

Prof. Dr. Beat Neuenschwander Leiter Institut ALPS

  • Präsenzzeit Montag
    Dienstag
    Mittwoch
    Donnerstag
    Freitag
  • Adresse Berner Fachhochschule
    Technik und Informatik
    Abt MNG Allgemeinbildung
    Pestalozzistrasse 20
    3400 Burgdorf

Tätigkeiten

  • Gruppenleiter "Laser Surface Engineering"

  • Wissens- und Technologietransfer

  • Experte für innosuisse

  • Chair des LASE Symposiums (Photonics West, San Francisco)

  • Mitglied im wissenschaftlichen Kommittee verschiedener Konferenzen

  • Laser-Mikrobearbeitung mit ultra-kurzen Laserpulsen

  • Hochpräzise und schnelle Strahlführung

Lehre

  • Mechanical Engineering

  • Microtechnology

  • Master of Science in Engineering

  • Physics 1 - 4

  • Applied Laser Technology

  • Optics

  • TSM_Laser (2021)

Forschung

  • Laser micro-processing with ultra-short pulses

  • Process Optimization

  • Light – Matter interaction

  • Up-scale processes for High Throughput: Demands, Limitation and Needs

  • Process control

Lebenslauf

  • Beat Neuenschwander studied physics at the University of Bern and realized 1996 his PhD at the Institute of Applied Physics in the field of diode pumped solid state lasers. From 1997 to 2002 he joined the company Numerical Modelling and since 2000 he is also at the Bern University of Applied Sciences BUAS where he lectures physics and applied laser technology. There he built up the laboratory for laser micro machining and laser surface engineering and became full professor in 2005. His main research topic, where he published more than 55 papers, is laser micromachining with ultra-short pulses and its industrial application. He is founder member of the national thematic network NTN swissphotonics, which he headed from 2008 – 2011 as managing director. Actually, he is expert for the founding agency innosuisse, head of the optics section of the Swiss Society for Optics and Microscopy SSOM and chair of the LASE symposium at Photonics West.
  • 1990 Internship Ascom Tech AG
  • 4/1997 – 12/2002 Employee and Assosciate Numerical Modelling GmbH
  • 9/1991 - 9/2001 Lecturer for Physics and applied Mathematics Hochschule für Technik und Architektur Bern, formerly “isbe”
  • 9/2001 - 8/2005 Lecturer for Physics and Applied Laser Technology Bern University of Applied Sciences, establishing of the laboratory for laser micromachining
  • 9/2005 - present Full professor for Applied Laser Technology Bern University of Applied Sciences
  • 8/1986 - 6/1992 Dipl. Phys. University of Bern
  • 7/1992 - 6/1996 PhD in Physics University of Bern

Projekte

  • Innosuisse 30051, “New concepts for ultrafast high resolution OCT”, 01.12.2018, 18 months

  • CTI 25548, “Ultra Short Pulses at high average power in the Laser MicroJet (USP LMJ)“, 18 months

  • Innosuisse 35418, “Impulse: Smart LAser Manufacturing for precision industry 4.0 (SLAM)”, 01.05.2019,
    18 months

  • CTI 26112, „Prädikatives Modell für Digitalisierte Laseranwendungen“, 1.8.2017, 24 months

  • CTI 25550, “TransMatLas – Bearbeitung transparenter Materialien mit Laserstrahlung“, 12 months

  • Innosuisse 37502, "Functional Surfaces for Stainless Steel", 01.06.2019, 24 months

  • Innosuisse 44150, “Smart Laser Structuring of Tools for Advanced Manufacturing of Functional Films (STAFF)”, 01.09.2020, 18 Months

  • CTI 18008.1, “SCULL – Stent Cutting with Ultra-fast laser Radiation by Line-Scanning”, 24 months

  • CTI 17858.1, “High Speed trepanning optic for short pulse laser drilling and cutting (SPEEDO)”, 24 months

  • EU GA 609355, “Hub of Application Laboratories for Equipment Assessment in Laser Based Manufacturing”, 01.09.2013, 48 months

  • CTI 17130.2, “Qualitätsfaktoren des Laserschneidens”, 01.01.2015, 24 months

  • CTI 16438.2, „Ultra Short Pulses for the Laser Microjet“, 01.06.2014, 24 months

  • CTI 16435.1, „High Speed tunable Lens“, 01.06.2014, 25 months

  • CTI 16049.1, “PICOFAB Fabrikation von Komponenten für die Präzisionsmechanik mit Picosekunden-Ultrakurpulslasern“, 01.11.2013, 18 months

  • CTI 13892.1, “Laser-based fabrication of biomimetric dental restorations”, 01.06.2012, 18 months

  • CTI 11257.2, “High Throughput Surface Structuring with ultra-short Laserpulses (HiTSLa), 01.11.2010, 35 months

  • CTI 11196.1, „PicoHi: Picosecond High Power Yb3+ power Amplifier“. 01.11.2010, 24 months

  • CTI 11080.2, “Makroschneiden mit Nahinfrarotlaser und Temperaturabhängige Werkstückellipsometrie” 01.06.2010, 24 months

  • CTI 10726.1, “Laserbearbeitung von Solarpanels”, 01.04.2010, 18 months

  • CTI 9114.2, „Pulsed Yb3+ power amplifier based on next generation microstructured fibers“, 01.09.2007, 27 months

  • CTI 8697.2, „Laser Patterning of Cu(In,Ga)SE2 solar cells on flexible foils for monolythic integration“, 01.07.2007, 24 months

Publikationen

  • Neuenschwander, Beat; Jaeggi, Beat; Zavedeev, E.V.; Arutyunyan, N. R.; Pimenov, S. M. (2019). Heat accumulation effects in laser processing of diamond-like nanocomposite films with bursts of femtosecond pulses Journal of Applied Physics, 126(11), S. 115301. AIP publishing 10.1063/1.5121424

  • Pimenov, S.M.; Zavedeev, E.V.; Arutyunyan, N.R.; Presniakov, M.Yu.; Zilova, O.S.; Shupegin, M.L.; Jaeggi, B; Neuenschwander, Beat (2019). Femtosecond-laser-ablation induced transformations in the structure and surface properties of diamond-like nanocomposite films Applied Surface Science, 509, S. 144907. Elsevier 10.1016/j.apsusc.2019.144907

  • Zavedeev, E.V.; Jaeggi, B.; Zürcher, Josef; Neuenschwander, Beat; Zilova, O. S.; Shupegin, M. L.; Presniakov, M. Yu.; Pimenov, S. M. (2018). Effects of AFM tip wear on frictional images of laser-patterned diamond-like nanocomposite films Wear, 416-41, S. 1-5. Elsevier 10.1016/j.wear.2018.09.008

  • Kramer, Thorsten; Remund, Stefan M.; Jäggi, Beat; Schmid, Marc Jean-Christophe; Neuenschwander, Beat (2018). Ablation Dynamics - from absorption to heat accumulation/ultra-fast laser matter interaction Advanced Optical Technologies, 7(3), S. 129-144. De Gruyter 10.1515/aot-2018-0010

  • Jaeggi, Beat; Foerster, Daniel J.; Weber, Rudolf; Neuenschwander, Beat (2018). Residual heat during laser ablation of metals with bursts of ultra-short pulses Advanced Optical Technologies, 7(3), S. 175-182. 10.1515/aot-2018-0003

  • Neuenschwander, Beat; Jaeggi, Beat; Foerster, Daniel J.; Kramer, Thorsten (2018). Influence of the Burst Mode onto the Specific Removal Rate for Metals and Semiconductors Journal of Laser Applications, 31(2), 022203. 10.2351/1.5096083

  • Kramer, Thorsten; Remund, Stefan Marco; Gafner, Markus; Zwygart, Daniel; Neuenschwander, Beat; Holtz, Ronald; Witte, Reiner; Dury, Noémie (2018). Novel Strategy for Ultrafast Pulsed Laser Micromachining of Rotational Symmetric Metallic Parts Procedia CIRP, 74, S 611-617. Elsevier 10.1016/j.procir.2018.08.076

  • Chaja, Michalina; Kramer, Thorsten; Neuenschwander, Beat (2018). Influence of laser spot size and shape on ablation efficiency using ultrashort pulse laser system Procedia CIRP, 74, S. 300-304. 10.1016/j.procir.2018.08.119

  • Zavedeev, E.V.; Zilova, O.S.; Barinov, A.D.; Shupegin, M.L.; Arutyunyan, N.R.; Jäggi, B.; Neuenschwander, Beat; Pimenov, S.M. (2017). Femtosecond laser microstructuring of diamond-like nanocomposite films Diamond related Materials, 74, S. 45-52. Elsevier 10.1016/j.diamond.2017.02.003

  • Kramer, Torsten; Zhang, Yiming; Jaeggi, Beat; Michalowski, Andreas; Grad, Lisa; Neuenschwander, Beat (2017). Increasing the Specific Removal Rate for Ultra Sdhort Pulsed Laser-Micromachining by Using Pulse Bursts JLMN-Journal of Laser Micro/Nanoengineering, 12(2), S. 107-114. 10.2961/jlmn.2017.02.0011

  • Pimenov, S.M.; Zavedeev, E.V.; Arutyunyan, N.R.; Zilova, O.S.; Shupegin, M.L.; Jäggi, B.; Neuenschwander, Beat (2017). Femtosecond-laser surface modification and micropatterning of diamond-like nanocomposite films to control friction on the micro and nanoscale. Journal of Applied Physics, 122(14), S. 145301. 10.1063/1.4998586

  • Jaeggi, Beat; Remund, Stefan Marco; Streubel, Rene; Goekce, Bilal; Barcikowski, Stefan; Neuenschwander, Beat (2017). Laser micromachining of metals with ultra-short pulses: Factors limiting the scale-up process JLMN-Journal of Laser Micro/Nanoengineering, 12(3), S. 267-273. 10.2961/jlmn.2017.03.0016

  • Jäggi, Beat; Remund, Stefan Marco; Zhang, Yiming; Kramer, Thorsten; Neuenschwander, Beat (2017). Optimizing the specific removal rate with the burst mode under varying conditions JLMN-Journal of Laser Micro/Nanoengineering, 12(3), S. 258-266. 10.2961/jlmn.2017.03.0015

  • Kramer, Thorsten; Neuenschwander, Beat; Jäggi, Beat; Remund, Stefan Marco; Hunziker, Urs; Zürcher, Josef (2016). Influence of Pulse Bursts on the Specific Removal Rate for Ultra-Fast Pulsed laser Micromachining of Copper. Physics Proceedia, 83, S. 123 – 134. Elsevier 10.1016/j.phpro.2016.08.024

  • Binetti, Simiona; Le Donne, Allessia; Rolfi, Andrea; Jaeggi, Beat ; Neuenschwander, Beat; Busto, Chiara; Frigeri, Cesare; Scorticati, Davide; Longoni, Luca; Pellegrino, Sergio (2016). Picosecond laser texturization of mc-silicon for photovoltaics: A comparison between 1064 nm, 532 nm and 355 nm radiation wavelengths Applied Surface Science, 371, S. 196 - 101. Elsevier 10.1016/j.apsusc.2016.02.187

  • Kramer, Torsten; Zhang, Yiming; Jaeggi, Beat; Michalowski, Andreas; Grad, Lisa; Neuenschwander, Beat (2017). Increasing the Specific Removal Rate for Ultra Short Pulsed Laser-Micromachining by Using Pulse Bursts JLMN-Journal of Laser Micro/Nanoengineering, 12(2), S. 107-114. 10.2961/jlmn.2017.02.0011

  • Neuenschwander, Beat; Jaeggi, Beat; Zimmermann, Markus; Markovic, Vesna; Resan, Bojan; Weingarten, Kurt; de Loor, Ronny; Penning, Lars (2016). Laser surface structuring with 100W of average power and sub-ps pulses Journal of Laser Applications, 28(2), 022506. Laser Institute of America (LIA) 10.2351/1.4944104

  • Pimenov, Sergei M.; Khomich, Andrey A.; Neuenschwander, Beat; Jäggi, Beat; Romano, Valerio (2016). Picosecond-laser bulk modification induced enhancement of nitrogen-vacancy luminescence in diamond Journal of the Optical Society of America B, 33(3), B49. 10.1364/JOSAB.33.000B49

  • Pimenov, Sergei M.; Khomich, Andrey A.; Vlasov, Igor I.; Zadedeev, Evgeny V.; Khomich, Alexander V.; Neuenschwander, Beat; Jeggi, Beat; Romano, Valerio (2014). Metastable carbon allotropes in picosecond-laser-modified diamond Applied Physics A, 116(2), S. 545-554. Springer 10.1007/s00339-014-8530-0

  • Pimenov, Sergei M.; Neuenschwander, Beat; Jäggi, Beat; Romano, Valerio (2014). Effect of crystal orientation on picosecond-laser bulk microstructuring and Raman lasing in diamond Applied Physics A Materials Science & Processing, 114(4), S. 1309-1319. Springer 10.1007/s00339-013-7953-3

  • Lauer, Benjamin; Jäggi, Beat; Neuenschwander, Beat (2014). Influence of the pulse duration onto the material removal rate and machining quality for different types of Steel Physics Procedia, 56, S. 963-972. ScienceDirect 10.1016/j.phpro.2014.08.116

  • Neuenschwander, Beat; Jaeggi, Beat; Schmid, Marc; Hennig, Guido (2014). Surface structuring with ultra-short laser pulses: Basics limitations and needs for high throughput Physics Procedia, 56, S. 1047-1058. ScienceDirect 10.1016/j.phpro.2014.08.017

  • Jaeggi, Beat; Neuenschwander, Beat; Meier, T.; Zimmermann, M.; Hennig, G. (2013). High Precision Surface Structuring with Ultra-Short Laser Pulses and Synchronized Mechanical Axes Physics Procedia, 41, S. 319-326. Elsevier 10.1016/j.phpro.2013.03.084

  • Neuenschwander, Beat; Jaeggi, Beat; Schmid, Marc (2013). From fs to Sub-ns: Dependence of the Material Removal Rate on the Pulse Duration for Metals Physics Proceedia, 41. 794 – 801. 10.1016/j.phpro.2013.03.150

  • Pimenov, Sergei M.; Khomich, Andrey A.; Vlasov, Igor I.; Neuenschwander, Beat; Muralt, Martin,; Romano, Valerio (2011). Picosecond-laser-induced structural modifications in the bulk of single-crystal diamond Applied Physics A Materials Science & Processing, 105, S. 673 – 677. Springer 10.1007/s00339-011-6645-0

  • Simmen, F.; Lippert, T.; Novák, P.; Neuenschwander, Beat; Döbeli, M.; Mallepell, M.; Wokaun, A. (2009). Influence of the substrate material on the properties of pulsed laser deposited thin Li1+xMn2O4−δ films Applied Surface Science, 255(10), S. 5303-5306. Elsevier 10.1016/j.apsusc.2008.08.016

  • Simmen, F.; Lippert, T.; Novák, P.; Neuenschwander, Beat; Döbeli, M.; Mallepell, M.; Wokaun, A. (2008). The influence of lithium excess in the target on the properties and compositions of Li1+x Mn2O4−δ thin films prepared by PLD Applied Physics A, 93(3), S. 711-716. Springer 10.1007/s00339-008-4701-1

  • Hirsiger, Thomas; Gafner, Markus; Remund, Stefan M.; Chaja, Michalina W.; Urniezius, Aivaras; Butkus, Simas; Neuenschwander, Beat (2020). Machining metals and silicon with GHz bursts: Surprising tremendous reduction of the specific removal rate for surface texturing applications In: Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXV (112670T). SPIE 10.1117/12.2543948

  • Neuenschwander, Beat; Remund, Stefan Marco; Kramer, Thorsten (2019). Laser machining of silicon with bursts of ultra-short laser pulses: Factors influencing the process efficiency and surface quality (Conference Presentation) In: Račiukaitis, Gediminas; Makimura, Tetsuya; Molpeceres, Carlos (Hg.) Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXIV (1090503). SPIE 10.1117/12.2513297

  • Kramer, Thorsten; Remund, Stefan Marco; Chaja, Michalina; Gafner, M.; Maehne, T.; Neuenschwander, Beat (2019). High Throughput and High Quality Surface Texturing with Ultrafast Lasers In: Laser Applications Conference (CW1C.5). Washington, D.C.: OSA 10.1364/LAC.2019.CW1C.5

  • Remund, Stefan M.; Chaja, Michalina V.; Zhang, Yiming; Neuenschwander, Beat (2019). Influence of pulse duration in the pico- and femtosecond regime on the absorptance and specific removal rate (Conference Presentation) In: Račiukaitis, Gediminas; Makimura, Tetsuya; Molpeceres, Carlos (Hg.) Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXIV (S. 3). SPIE 10.1117/12.2511294

  • Jaeggi, B.; Cangueiro, L.; Bruneel, D.; Ramos de Campos, J.A.; Hairaye, C.; Neuenschwander, Beat (2018). Micromachining using pulse bursts: Influence of the pulse duration and the number of pulses in the burst on the specific removal rate Proc. SPIE, 10519. https://doi.org/10.1117/12.2289549

  • Hennig, Guido; Bruening, Stephan; Jäggi, Beat; Stirnimann, Adrian; Neuenschwander, Beat (2018). Beam delivery methods for highly efficient USP-laser micro structuring of large cylindrical surfaces for printing and embossing Proc. SPIE, 10519, S. 7. 10.1117/12.2290356

  • Schmid, Marc; Zehnder, S.; Cam, Peter; Schwaller, Patrick; Neuenschwander, Beat (2018). Temperature dependency of optical properties of metals: comparing ellipsometric data with theoretical models In: 19th International Symposium on Laser Precision Microfabrication. Edinburgh / UK. 25.-28.06.2018.

  • Oehler, A.E.H.; Ammann, A.; Benetti, M.; Wassermann, D.; Jäggi, Beat; Remund, Stefan Marco; Neuenschwander, Beat (2018). How a new random trigger-feature for ultrashort-pulsed lasers increases Throughput, quality and accuracy in micromachining applications In: 19th International Symposium on Laser Precision Microfabrication. Edinburgh / UK. 25.-28.06.2018.

  • Gafner, Markus; Remund, Stefan Marco; Neuenschwander, Beat; Mähne, Torsten (2018). Optimized Strategies for Galvo Scanning in Fully Synchronized Mode Leading to Massive Improvement in Maching Time In: 37th International Congress on Applications of Lasers & Electro Optics ICALEO. Orlando, Florida / USA. 14.-18.10.2018.

  • Jaeggi, Beat; Foerster, Daniel J.; Neuenschwander, Beat; (2018). Process Optimization by Bursts of Ultrafast Laser Pulses and Considerations of Absorptance and Residual Heat In: 2018 Conference on Lasers and Electro-Optics (CLEO). Washington, D.C.: OSA 978-1-943580-42-2

  • Neuenschwander, Beat; Jäggi, Beat; Remund, Stefan Marco; Zavedeev, E.; Pimenov, Sergei M. (2018). Machining of semiconductors and dielectrics with ultra-short pulses: Influence of the wavelength and pulse bursts (Conference Presentation) In: Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXIII (S. 3). SPIE 10.1117/12.2291909

  • Jaeggi, Beat; Neuenschwander, Beat; Remund, Stefan Marco; Eilzer, S.; Funck, M. C.; Wedel, B. (2017). Laser-micro-processing with ultrashort pulses using flexible beam delivery In: WLT-Conference on Lasers in Manufacturing. Munich / Germany. 26.-29.06 2017.

  • Pimenov, Sergei; Zavedeev, Evgeny; Arutyunyan, Natalia; Zilova, Olga; Shupegin, Mikhail; Jaeggi, Beat; Neuenschwander, Beat (2017). Femtosecond-laser surface micropatterning of diamond-like nanocomposite coatings to improve friction on the microscale In: WLT-Conference on Lasers in Manufacturing. Munich / Germany. 26.-29.06 2017.

  • Oehler, Andreas; Ammann, Hubert; Benetti, Marco; Wassermann, Dominique; Jaeggi, Beat; Remund, Stefan Marco; Neuenschwander, Beat (2017). New random trigger-feature for ultrashort-pulsed laser increases throughput, accuracy and quality in micromachining applications In: Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXII (100910I). SPIE 10.1117/12.2252599

  • Jaeggi, Beat; Neuenschwander, Beat; Kramer, Thorsten; Remund, Stefan Marco (2017). Influence of the pulse duration and the experimental approach onto the specific removal rate for ultra-short-pulses In: Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXII (100910J). SPIE 10.1117/12.2253696

  • Zhang, Yiming; Neuenschwander, Beat; Romano, Valerio (2017). Numerical study of the influence of picosecond laser spot size on laser ablation of metal for high laser fluence cases In: Proc. of SPIE Vol. 10091, Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXII (100910S). SPIE 10.1117/12.2253629

  • Neuenschwander, Beat; Jeggi, Beat; Kramer, Thorsten (Oktober 2016). Influence of the initial Surface Finish of the Ample onto the Machining Quality for Ultra Short Laser Pulses Journal of Laser Applications. https://doi.org/10.2351/1.5118608

  • Jäggi, Beat; Neuenschwander, Beat (Oktober 2016). Optimized Strategies for Seamless Stitching with Synchronized Galvo Scanner and Linear Axis In: 35th ICALEO. San Diego. 16.10.2016 - 20.10.2016. 10.2351/1.5118606

  • Jaggi, Beat; Neuenschwander, Beat; Zimmermann, Markus; Zecherle, Markus; Boeckler, Ernst W. (2016). Time-optimized laser micro machining by using a new high dynamic and high precision galvo scanner Proc. SPIE, 9735, S. 973513. SPIE 10.1117/12.2210791

  • Zhang, Yiming; Lauer, Benjamin; Neuenschwander, Beat; Romano, Valerio (2016). Numerical study of the influence of picosecond laser spot size on ablated depth and threshold fluence of metal In: Proc. of SPIE Vol. 9735 97350M-1, Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXI (97350M). SPIE 10.1117/12.2210981

  • Lauer, Benjamin; Jäggi, Beat; Zhang, Yiming; Neuenschwander, Beat (Oktober 2015). Measurement of the maximum specific removal rate : unexpected influence of the experimental method and the spot size In: The 34th International Congress on Applications of Lasers & Electro-Optics (ICALEO) (S. 146-154). Laser Institute of America 10.2351/1.5063162

  • Zimmermann, Markus; Jäggi, B.; Neuenschwander, Beat (2015). Improvements in ultra-high precision surface structuring using synchronized galvo or polygon scanner with a laser system in MOPA arrangement In: SPIE Photonics WEST (S. 935016). SPIE 10.1117/12.2076724

  • Cam, Peter; Neuenschwander, Beat; Schwaller, Patrick; Köhli, Benjamin; Lüscher, Beat; Senn, Florian; Kounga, Alain; Appert, Christoph (2015). A novel laser-based method for controlled crystallization in dental prosthesis materials In: SPIE BiOS: Lasers in Dentistry XXI. San Francisco, United States. 24.02.2015. 10.1117/12.2076567

  • Neuenschwander, Beat; Kramer, Thorsten; Lauer, B.; Jäggi, B. (März 2015). Burst mode with ps- and fs-pulses: Influence on the removal rate, surface quality and heat accumulation In: SPIE Photronics WEST Conference 9350. Bellingham: Society of Photo-Optical Instrumentation Engineers (SPIE) https://doi.org/10.1117/12.2076455

  • Neuenschwander, Beat; Jäggi, Beat; Zimmermann, Markus; Hennig, Guido (2014). Influence of Particle Shielding and Heat Accumulation Effects onto the Removal Rate for Laser Micromachining with Ultra-Short Pulses at High Repetition Rates. In: 33rd International Congress on Applications of Lasers & Electro-Optic. San Diego. 19.10.2014 - 23.10.2014. 10.2351/1.5063063

  • Jaeggi, Beat; Neuenschwander, Beat; Zimmermann, Markus; de Loor, R.; Penning, L. (2014). High throughput ps-laser micro machining with a synchronized polygon line scanner In: LANE 2014 8th International Conference on Photonic Technologies. Fürth / Germany. 8.-11.9.2014.

  • Neuenschwander, Beat; Jaeggi, Beat; Zimmermann, Markus; Penning, L.; deLoor, R. (2014). High Throughput Laser Processing with Ultra-Short Pulses by High Speed Line-Scanning in Synchronized Mode In: CLEO: Applications and Technology (ATu3L.2). Washington, D.C.: OSA 10.1364/CLEO_AT.2014.ATu3L.2

  • Jaeggi, Beat; Neuenschwander, Beat; Zimmermann, Markus; Penning, L.; deLoor, R.; Weingarten, K.; Oehler, A.; (2014). High-throughput and high-precision laser micromachining with ps-pulses in synchronized mode with a fast polygon line scanner In: SPIE LASE. San Francisco, California, United States. 06.04.2014. 10.1117/12.2037379

  • Neuenschwander, Beat; Jaeggi, Beat; Romano, Valerio; Pimenov, Sergei (2014). Picosecond-laser bulk modification, luminescence and Raman lasing in single-crystal diamond In: Proc. SPIE 8967, Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XIX, 89670B. San Francisco / USA. 1.-6.2.2014. 10.1117/12.2040545

  • Lauer, Benjamin; Neuenschwander, Beat; Jaeggi, Beat; Schmid, Marc (2013). From fs – ns: Influence of the pulse duration onto the material removal rate and machining quality for metals In: ICALEO® 2013: 32nd International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing (S. 763-770). Laser Institute of America 10.2351/1.5062963

  • Neuenschwander, Beat; Jäggi, Beat; Zimmermann, Markus; Penning, Lars; de Loor, Ronny; Weingarten, Kurt; Oehler, Andreas (2013). High throughput surface structuring with ultrashort pulses in synchronized mode with fast polygon line scanner In: ICALEO® 2013: 32nd International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing (S. 677-685). Laser Institute of America 10.2351/1.5062949

  • Jaeggi, Beat; Neuenschwander, Beat; Meier, Thomas; Zimmermann, Markus; Hennig, Guido (2013). High throughput laser micro machining on a rotating cylinder with ultra short pulses at highest precision In: SPIE LASE (86070E). SPIE 10.1117/12.2004099

  • Schmid, Marc; Zehnder, Sarah; Schwaller, Patrick; Neuenschwander, Beat; Zürcher, Joseph; Hunziker, Urs (2013). Measuring the complex refractive index of metals in the solid and liquid state and its influence on the laser machining Proc. SPIE, 86071I. SPIE 10.1117/12.2003744

  • Neuenschwander, Beat; Jaeggi, Beat; Schmid, Marc; Dommann, A.; Neels, A.; Bandi, T.; Hennig, Guido (2013). Factors controlling the incubation in the application of ps laser pulses on copper and iron surfaces In: SPIE LASE (86070D). SPIE 10.1117/12.2004136

  • Neuenschwander, Beat; Jaeggi, Beat; Schmid, Marc (2012). From ps to fs: Dependence of the material removal rate and the surface quality on the pulse duration for metals, semiconductors and oxides In: ICALEO® 2012: 31st International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing (S. 959-968). Laser Institute of America 10.2351/1.5062570

  • Jaeggi, Beat; Neuenschwander, Beat; Hunziker, Urs; Zuercher, Joseph; Meier, Thomas; Zimmermann, Markus; Hennig, G. (2012). High precision and high throughput surface structuring by synchronizing mechanical axes with an ultra short pulsed laser system in MOPA arrangement In: ICALEO® 2012: 31st International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing (S. 1046-1053). Laser Institute of America 10.2351/1.5062381

  • Neuenschwander, Beat; Jaeggi, Beat; Schmid, Marc; Rouffiange, Vincent; Martin, Paul-E.; Hennig, Guido (2012). Optimization of the volume ablation rate for metals at different laser pulse-durations from ps to fs In: SPIE LASE. San Francisco, California, USA. 15.02.2012. 10.1117/12.908583

  • Jaeggi, Beat; Neuenschwander, Beat; Hunziker, Urs; Zuercher, Joseph; Meier, Thomas; Zimmermann, Markus; Selbmann, Karl-Heinz; Hennig, Guido (2012). Ultra-high-precision surface structuring by synchronizing a galvo scanner with an ultra-short-pulsed laser system in MOPA arrangement In: SPIE LASE. San Francisco, California, USA. 15.02.2012. 10.1117/12.909844

  • Neuenschwander, Beat; Jaeggi, Beat; Schmid, Marc; Lüscher, Beat; Nocera, Carmine (2011). Processing of Industrially Relevant Non Metals with Laser Pulses in the Range Between 10Ps and 50Ps In: International Congress on Applications of Lasers & Electro-optics. Orlando, FL, USA. 23. - 27. October 2011. 10.2351/1.5062327

  • Jaeggi, Beat; Neuenschwander, Beat; Schmid, Marc; Muralt, Martin; Zuercher, Joseph C.; Hunziker, Urs (2011). Influence of the Pulse Duration in the ps-Regime on the Ablation Efficiency of Metals Physics Procedia, 12, S. 164-171. Elsevier 10.1016/j.phpro.2011.03.118

  • Schwaller, Patrick; Zehnder, S.; von Arx, U.; Neuenschwander, Beat (2011). A novel Model for the Mechanism of Laser-Induced Back Side Wet Etching in Aqueous Cu Solutions using ns Pulses at 1064nm Physics Procedia, 12, S. 188-194. Elsevier 10.1016/j.phpro.2011.03.121

  • Zehnder, S.; Schwaller, Patrick; von Arx, U.; Bucher, Guido; Neuenschwander, Beat (2011). Micro structuring of transparent materials with NIR ns-laser pulses Physics Procedia, 12, S. 195-200. Elsevier 10.1016/j.phpro.2011.03.122

  • Hennig, Guido; Resing, Markus; Mattheus, Stefan; Neuenschwander, Beat; Brüning, Stephan (2011). Laser Microstructuring and Processing in Printing Industry In: CLEO: Applications and Technology (AMD4). Washington, D.C.: OSA 10.1364/CLEO_AT.2011.AMD4

  • Schmid, Marc; Neuenschwander, Beat; Romano, Valerio; Hennig, Guido; Jaeggi, Beat; Hunziker, Urs (2011). Processing of metals with ps-laser pulses in the range between 10ps and 100ps In: SPIE LASE (S. 792009). SPIE 10.1117/12.879498

  • Neuenschwander, Beat; Bucher, Guido; Hennig, Guido; Nussbaum, Christian; Joss, Benjamin; Muralt, Martin; Zehnder, Sarah; Hunziker, Urs; Schütz, Peter (26 September 2010). Processing of Dielectric Materials and Metals with ps Laserpulses In: ICALEO 2010 (S. 707-715). AIP publishing 10.2351/1.5062103

  • Neuenschwander, Beat; Bucher, Guido; Nussbaum, Christian; Joss, Benjamin; Muralt, Martin; Hunziker, Urs; Schütz, Peter (2010). Processing of metals and dielectric materials with ps-laserpulses: results, strategies, limitations and needs In: SPIE LASE (75840R). SPIE 10.1117/12.846521

  • Neuenschwander, Beat; Bucher, Guido; Schwaller, Patrick; Nussbaum, Christian; Joss, Benjamin; Schuetz, Peter (2009). Direct generation of conducting microstructures by laser induced plasma assisted ablation with ps-laserpulses In: proceedings of the Fifth International WLT-Conference Lasers in Manufacturing, LIM 2009 : Munich, Germany, June 15th - 18th. S. 819

  • Optics & Optoelectronics 2019, Prague, Czech Republic
    High Power Ultrafast Lasers: System Technology and Machining Strategies for Applications

  • OSA 2019 Laser Congress, Laser Applications Conference, Vienna, Austria
    High Throughput and High Quality Surface Texturing with Ultrafast Lasers

  • World Laser Manufacturing Conference 2019, Shenzen, China
    Laser Machining in Switzerland: A Versatile Tool for the Precision Industry

  • The third Smart Laser Processing Conference 2018, Yokohama, Japan
    High throughput surface texturing of embossing rollers with fs-laser and polygon line scanner in fully synchronized mode

  • JNPLI 2017, Strasbourg, France
    Scale-up high quality surface structuring of metals with ultra-short pulses above 100 W of average power

  • LPM 2017, Toyama, Japan
    Laser micromachining of metals with ultra-short pulses: factors limiting the scale-up process

  • OSA 2016 Laser Congress, Laser Applications Conference, Boston, USA
    Surface Texturing with Ultra Short Laser Pulses: Ways to Scale Up Throughput

  • The Second Smart Laser Processing Conference 2016, Yokohama, Japan
    Process Parameter Optimization for High Speed and High Quality Surface Structuring of Metals with 100 W of Average Power and Ultra-Short Pulses

  • ALT’15, Faros, Portugal 2015
    High throughput surface structuring with high power sub ps laser in synchronized mode

  • LANE, Fürth, Germany 2014
    Surface structuring with ultra-short laser pulses: Basics limitations and needs for high throughput

  • LPM, Vilnius, Lithuania 2014
    High efficient and high throughput surface texturing

  • CLEO, San José, USA 2014
    High throughput laser processing with ultrashort pulses by high speed line scanning in synchronized mode

  • ALT’11, Golden Sands, Bulgaria 2011
    Surface structuring of metals with ps-laserpulses: How to optimize process efficiency and surface quality

  • ICALEO, Anaheim, USA, 2010
    Processing of dielectric materials and metals with ps laserpulses

  • LAMOM XV, Photonics West, San Francisco, USA, 2010
    Processing of metals and dielectric materials with ps-laserpulses: results, strategies, limitations and needs

Mitgliedschaften

  • FoKo TI

  • Aufnahmekommission

  • Swissphotonics

  • SSOM (Swiss Society of Optics and Microscopy)

  • SPIE (the international society for optcs and photonics)

  • LIA (Laser Institute of America)

  • OSA (Optical Society of America)

Sprachen- und Länderkenntnisse

  • Deutsch
  • Englisch
  • Französisch
  • Vereinigte Staaten von Amerika
  • Kanada
  • Japan
  • China